How to install and use DVD-RB Pro + CCE SP 2.7 guide by Alkohol
NOTE: this is just a basic guide for newbies or
those that are interested on using DVD-RB Pro +
CCE SP only.
WARNING: please don't use
cracked versions, DVD-RB Pro is merely $30 and to be
honest, it's worth every penny. I never used DVD-RB
Basic; I went straight with the Pro version and never
looked back. Please support Jdobbs for
all of his hard works.
A big thanks to Jdobbs for creating
such a beautiful tool for the few of us, especially
those that values the "quality" of their DVD
backups.
This guide will cover:
• The installation of DVD-RB Pro
• Encoder's Configuration
• DVD-RB Pro's basic settings
• Basic Encoding steps using DVD-RB Pro +
CCE SP 2.70
Tools
• DVD-RB Pro
http://www.jdobbs.com/
•
CCE SP
http://www.cinemacraft.com/eng/index.html
• ProCoder 2
http://www.canopus.com/products/ProCoderSW/index.php
• Hank's HC Encoder
http://www.bitburners.com/HC_Encoder/
NOTE: a lot of people either use
DVD-RB Pro +
CCE SP 2.70 or ProCoder
2. Some says ProCoder 2 is better than
CCE SP, yet some preferred
CCE SP over ProCoder 2 due to preference. However,
CCE SP 2.70 is faster, there's no doubt about that.
So the choice is yours.
<><> STEP 1: DVD-RB Pro
Installation <><>
Once you've legally purchased DVD-RB Pro and Jdobbs
has sent you a "setup" zip file with your "key file"
via email. Click on the "setup" to run.
You can either create or don't create a Start
Menu folder.
Create a folder in your hard drive for DVD-RB's
"Work Folder", then browse and locate
the folder.
Create a folder in your hard drive for DVD-RB's
"OutPut Folder", then browse and
locate the folder.
NOTE: if you have 2 hard drives, then set
"OutPut Folder" to another drive, this
will run smoother in my opinion.
<><> STEP 2: Encoder's
Configuration <><>
NOTE: this is where you need to choose
CCE SP or ProCoder as your engine.
NOTE: click YES here, but use the
SETUP via DVD-RB Pro's Settings "Path
to
CCE SP NEW" to
CCE SP directory.
NOTE: if you have Canopus ProCoder,
choose ProCoder.
<><> STEP 3: DVD-RB
Pro's Settings <><>
click on Settings, then
Setup.
(1) click ALL (2) scroll down and
untick ENGLISH or whatever your desire
language (3) click SAVE
(1) Again, click ALL (2) scroll down
and untick ENGLISH or whatever your
desire language (3) click SAVE
Here you can remove DTS Audio or
Director's Comments. The choice is
yours.
Mode, Encoder (
CCE), then tick on CCE
Mode (or your desire encoding engines).
I like to use "One Click Mode"
because this automatically does all the jobs for
you.
Mode, Backup Mode (Full Backup) and
choose your desire backup mode.
Mode, Steal Space from Extras, then
choose whatever your desire (10%, 25%, 33% or
50%).
Click on Settings,
CCE Settings,
CCE SP, Advanced (Experts) Settings
Slide the bar to the right for more PASSES (or to your
desire). The most I used is 3 PASSES
because I don't have the latest rig, so 3 is good
enough for me.
Now just click SAVE.
<><> STEP 4: Encoding
process using DVD-RB Pro +
CCE SP 2.70 <><>
Click on the Folder to browse and
locate your movie to be encoded.
Locate your movie, then click
OK.
This is where DVD-RB Pro is going to put the finished
"ready to burn" files here.
When everything's set, click
Backup.
Now DVD-RB Pro is encoding, so just relax and sit
tight.
Now Phase II ENCODING is completed.
Now Phase III REBUILD is completed. Overall, it took
149 minutes to finish with 3 PASSES. Not too bad for my
old P4, 2.66GHz, I guess she's alright.
That's it, DVD-RB Pro has successfully encoded and
imported the "ready to burn" files into the
"Destination Path" folder. Just open
up ImgBurn,
Nero Burning Rom or your desire burning engine and
burn your already encoded files.
Enjoy it!
